The RWS3 unit is used for pumping rainwater from the tank with automatic switching to mains water in case of its scarcity, including protection against running dry.
| Category: | Pumps and water plants for rainwater |
|---|
The unit detects water shortage in the rainwater collection system and the main water collection system and corrects it to ensure the system operates properly (or rather, it never allows designated users to run out of water). The use of this system is generally limited to irrigation, washing machines, toilet flushing tanks, and floor cleaner systems. The main goal of the system is to prioritize the use of rainwater instead of tap water. If there is a shortage of rainwater captured in the collection tank, the control unit sends a signal to the water supply system, ensuring water supply to the points of consumption (water supplied by the system is not potable). The connection between the rainwater collection tank and the tap water collection tank, which is integrated into the system, is achieved using a three-way valve installed on the pump suction. The pump operates exactly like a start-stop system, controlling flow and pressure. If the pressure drops below the set value, the pump starts; if the supply is stopped, the pump stops. If there is a water shortage, the pump stops, and a warning alert is signaled on the pump control panel. After a preset time interval, the pump restarts, and if all activities are within parameters, it will continue normal operation. This system also includes odor and leak prevention. SCOPE OF DELIVERY
RWS unit for rainwater and non-rainwater drainage Mounting bracket and accessories Water level sensor with a 20m cable
Be the first who will post an article to this item!